Boot Stretcher Guide
The steps below show how to use your Premium Boot Stretchers for a precise, comfortable fit.
Thank you for your recent purchase. This guide applies to both our Premium Boot Stretcher and Premium High Heel Boot Stretcher. If your boots feel tight or are causing discomfort, they are designed to relieve pressure and improve fit. Follow this guide for the best result.
Before You Begin
Before inserting the stretcher into your boots, take a moment to reset it to its starting position. This means ensuring both the widening handle is fully closed by turning it anti-clockwise. Beginning from this position allows the stretcher to slide easily into the shoe and prevents the mechanism from binding or getting stuck during insertion.
Step 1. Prepare the leather
Apply Trimly Shoe Stretch Spray inside the boots, spraying it towards the area you feel is tight or pinching. This helps relax the leather so it can stretch safely.
Insert the Spot Stretching Plug(s) [B] into the Toe Block [A], if required.
Step 2. Insert the stretcher
Slide the Toe Block [A] into the toe box of the shoe.
Ensure the toe block sits fully inside the shoe before adjusting the stretcher.
Step 4. Adjust the width
Turn the widening handle (C) clockwise to expand the toe block and widen the shoe.
Once resistance is felt, add two to three additional turns to create the stretch.
Step 5. Leave stretcher in place
Leave the stretcher inside the shoe for 6–8 hours.
For tighter shoes or thicker leather, leaving it overnight often produces better results.
Step 6. Remove the stretcher
To remove the stretcher, first release the pressure turn the widening handle [C] counter-clockwise
This retracts the blocks so the stretcher can be removed easily. Pull it out slowly.
FAQ Stretching Your Boots
-
You can typically gain up to half a size in width.
Stretching length is limited and less reliable. -
Not essential, but recommended, especially if you're in a rush.
Trimly Stretch Spray helps soften the material and improves how well the stretch holds. -
Best results come from leather and suede.
Canvas and some synthetics may stretch slightly, but they often revert over time. Fully synthetic uppers usually resist stretching. It will not work on work-capped boots.
-
Most boots respond within 1 to 3 rounds.
Stretch, remove, try on, then repeat if needed.
If there’s no improvement after three attempts, the shoe is likely too small or unsuitable for stretching with these devices. -
Common reasons:
- The boots are more than half a size too small
- The upper is synthetic or heavily treated
- Not enough tension was applied
- The stretcher wasn’t left in long enough
- The boots are more than half a size too small
-
Yes.
Shoe Trees help hold the adjusted shape and reduce the chance of the leather pulling back between wears. -
Applying too much tension can overstretch your boots, leaving them loose and misshapen. It can also damage the stretcher’s threading, making it difficult or impossible to use.
Tip: When you start to feel tension, give the turning handle three more turns. That's the sweet spot. -
Yes, your stretchers are guaranteed for 2½ years. Any problems, we're here to help via info@trimly.com.au.
"When you start to feel tension, give the turning handle three more turns. That's the sweet spot."
Stretcher Range
Select from our range of high-quality premium shoe stretchers, boot stretchers and high heel stretchers and have yours shoes or boots comfortable in less than a day.
